ANSYS helps AUV-IITK design its latest vehicle Anahita


AUV-IITK is a multidisciplinary team of IITK students involved in designing, manufacturing, and testing of a series of Autonomous Underwater Vehicles (AUVs), working towards providing a research platform for geoscientific research while preparing to compete in prestigious competitions such as NIOT, SAUVC, and RoboSub.

After two successful prototypes, we have developed two AUVs, namely Varun and Anahita, and both of them have obtained the 1st Runners Up position in NIOT-SAVe 2017 and 2019 respectively. The goal of these competitions is to promote autonomy in underwater vehicles, which is considerably difficult.

![CAD Model of ANAHITA](/assets/images/blog/posts/ANSYS helps AUV-IITK design its latest vehicle Anahita/Anahita.jpg “CAD Model of ANAHITA”){:height="15%” width="100%"} CAD Model of ANAHITA

Flow Analysis using ANSYS

One of the primary stages in designing and modeling of an AUV is the study of the motion of the vehicle and the subsequent visualization of fluid flow across the body of the bot.

Using ANSYS, we can produce 3D flow visualization. Using which we can identify vortex location, find streamlines of velocity across 3D and 2D profiles of the vehicle and find the total drag force on the robot.

![Flow Velocity Streamlines visualisation using ANSYS Fluent](/assets/images/blog/posts/ANSYS helps AUV-IITK design its latest vehicle Anahita/VelocityStreamlines.jpg){:height="15%” width="100%"} Flow Velocity Streamlines visualisation using ANSYS Fluent

For selecting the present design of the vehicle, we listed all the possible orientations (we thought of seven designs by hand) and then calculated the drag for all the designs and selected the one with least drag. Accordingly, we simulated our vehicle in ANSYS Fluent and obtained a drag versus speed graph for our system. The present vehicle has a drag of 10N about at 0.6m/s speed of the vehicle.

![Drag vs Velocity graph obtained](/assets/images/blog/posts/ANSYS helps AUV-IITK design its latest vehicle Anahita/DragVsVelocity.png){:height="15%” width="100%"} Drag vs Velocity graph obtained

Optimisation of Open Frame

The frame or the outer structure is one of the most critical parts of a vehicle; it holds all the components together and provides structural strength to the AUV. This year, in Anahita, we have implemented an open frame design.

To make the best-optimized frame, we used the Static Structural analysis of ANSYS Mechanical. Using this we compute the stresses acting on the plate at each point, by feeding in the forces that to be applied at the different faces.

Using the knowledge of the different stresses, we perform topology optimization on the plate and using it, reduce the mass of the frame without compromising on the strength and robustness it offers.

![The side plate after Topology Optimization](/assets/images/blog/posts/ANSYS helps AUV-IITK design its latest vehicle Anahita/SidePlateTopologyOptimization.jpg){:height="35%” width="100%"} The side plate after Topology Optimization

Using the diversity offered by the ANSYS workbench, we could finalize on the final design of the frame, and international experts have appreciated this design work. Our team presented the research paper, ‘Design and Development of an Open Frame AUV: ANAHITA’ at the IEEE OES Symposium held at the University of Porto in November 2018.

![Final design of the frame for vehicle, ANAHITA](/assets/images/blog/posts/ANSYS helps AUV-IITK design its latest vehicle Anahita/FinalFrame.png){:height="15%” width="100%"} Final design of the frame for vehicle, ANAHITA

Apart from this, we have performed structural analysis for most of the components in our AUV, taking into account the applied forces, their rigidity, and the material to be used for manufacturing. ![Mount for Teledyne's Doppler Velocity Log being analysed](/assets/images/blog/posts/ANSYS helps AUV-IITK design its latest vehicle Anahita/AfterStructuralAnalysis.jpg){:height="20%” width="100%"} Mount for Teledyne's Doppler Velocity Log being analysed

Our team aims to develop a new vehicle for the next year of competitions, and we will be designing an entirely new structure of our bot. We will be using ANSYS to help make design choices, notably determining the hydrodynamic characteristics and analyzing structural loading of the frame, before committing to a design and beginning the manufacturing process.

To know more, find us on Facebook